Drum Rotary Drying Machinery
High-efficiency drying: Adopting multi-layer drum design, the sawdust is heated evenly and the moisture evaporates quickly, and the hourly handling capacity can reach several tons, which greatly improves the drying efficiency.
Energy-saving and power-saving: equipped with intelligent temperature control system, accurately adjusting the output of heat source, combined with waste heat recovery device, heat utilization rate is increased by more than 30%, reducing operating costs.
Strong adaptability: it can deal with sawdust of different humidity and particle size, and the feed volume is flexible and adjustable, meeting the needs of biomass fuel, organic fertilizer processing and other scenarios.
Easy to operate: fully automatic control, no need to be manned after one-key start, equipped with fault alarm function, convenient maintenance, reduce labor costs.
Yuchuan sawdust dryer is specially made for efficiently processing wet sawdust. It mainly consists of heat source, dispersing device, loader, feeder, rotary drum, transmission parts, discharger, induced draft fan, unloader and distribution cabinet.
In terms of performance, Yuchuan sawdust dryer has significant advantages. Its drying efficiency is very high, the use of hot air downstream drying process, so that the material and the hot air large area contact, greatly shorten the drying time. Strong processing capacity, the daily processing capacity can reach 50 - 500 tons, reducing drying costs. Equipment structure is simple, covers a small area, easy to build and maintain. Stable and reliable operation, capable of 24-hour continuous operation, effectively reducing operating costs.
Wide range of applications, in addition to sawdust, can also be used for wood chips, bamboo chips and other materials drying. Equipped with clean heat source, multi-stage dust removal to ensure environmental protection standards, saving energy consumption, reduce costs.
When working, the wet sawdust enters into the dispersing equipment through the belt conveyor, and after dispersing, it enters into the dryer with negative pressure. In the dryer, it first contacts with high temperature negative pressure hot air in the material guide area, and evaporates a large amount of water quickly; then in the cleaning area, the sweeping device cleans up the sawdust sticking to the cylinder wall and crushes the lumps; then it completes the low-temperature drying in the tilting lifting plate area; and finally it discharges the dry finished products in the discharging area, which completes the whole drying process.
